Sport Coating
100% Acrylic Emulsion Coating
Surface 1 Sport Coating is a 100% acrylic coating for tennis, basketball, pickleball, multi-purpose courts, and recreational areas. Surface 1 Sport Coating is fortified with sand to provide a safe, non-slip surface. Our revolutionary formula provides superior hiding and durability with two coats.
Tools Needed:
Specifications
- Light Green Item #: 104147970
- Dark Green Item #: 104147988
- Blue Item #: 104147996
- Unit Size: 55 Gallon Drums
- Unit Weight: 660 lbs.
Colors Available:
Dark Green
Light Green
Blue
Colors may vary slightly in color or finish from the actual product in the container, due to age, light, heat and printing process. For actual color chips please call 1-800-394-0047.
Surface 1 Sport Coating
Description
Surface 1 Sport Coating is a 100% acrylic coating for tennis, basketball, pickleball, multi-purpose courts, and recreational areas. Surface 1 Sport Coating is fortified with sand to provide a safe, non-slip surface. Our revolutionary formula provides superior hiding and durability with two coats.
Surface Preparation
New asphalt must cure for a minimum of 14 days, and new concrete must cure for a minimum of 30 days before
application. Surface must be clean and free from loose materials, dirt, organic growth, and other debris.
Mixing
Surface 1 Sport Coating is a pre-tinted product with sand
factory mixed. The product needs water mixed in before
application. Stir thoroughly before applying.
The following mix design is for a 55-gallon drum of Surface 1
Sport Coating:
Surface 1 Sport Coating…………..55 gallons
Water…………………………………….20-25 gallons
Application
Apply Surface 1 Sport Coating with a soft rubber squeegee (50-60 durometer recommended for squeegee rubber softness). Surface 1 recommends applying the complete multi-coat system to fill surface voids, change color schemes, and achieve a longer-lasting surface. Allow each coat to dry completely before applying additional coats or lines.
Drying Time
Drying time is dependent on temperature, shade, humidity, etc. (1 to 4 hours of dry time per coat can be expected).
Weather Conditions
Application temperature must be a minimum 50˚F and rising. Do not apply when temperature is expected to drop below 50˚F within a 24-hour period. In areas where dew or fog accumulates in the early evening, it is best to coat in the morning. Stop coating by early afternoon (3:00 pm) to prevent wash off, which will occur if dew, fog, or rain arrives before coating dries. Do not apply if rain is imminent or forecast within 24 hours of application.
Coverage
1 gallon will cover approximately 100-125 sq. ft., depending on pavement porosity (6,875 sq. ft. per 55-gallon pail).