Sport Coating Base
Foundation for lasting color
Surface 1 Sport Coating Base is a 100% acrylic coating for tennis, basketball, pickleball, multi-purpose courts and recreational areas. Surface 1 Sport Coating Base is fortified with sand to provide a safe, non-slip surface. Our revolutionary formula provides superior hiding and durability
with two coats.
Tools Needed:
Specifications
- Item #: 104147962
- Unit Size: 4.75 Gallon Pail
- Unit Weight: 57.5 lbs.
Sport Coating Base
Colors Available:
Neutral
Designed to be Mixed with Color Tint Packs
Dark Green
Light Green
Red
Light Blue
Blue
Gray
Colors may vary slightly in color or finish from the actual product in the container, due to age, light, heat and printing process. For actual color chips please call 1-800-394-0047.
Got a larger project?
Select color coatings are available in 55 gallon drums!
Surface 1 Sport Coating Base
Description
Surface 1 Sport Coating Base is a 100% acrylic coating for tennis, basketball, pickleball, multi-purpose courts and recreational areas. Surface 1 Sport Coating Base is fortified with sand to provide a safe, non-slip surface. Our revolutionary formula provides superior hiding and durability
with two coats.
Surface Preparation
New asphalt must cure for a minimum of 14 days, and new concrete must cure for a minimum of 30 days before
application. Surface must be clean and free from loose materials, dirt, organic growth, and other debris.
Mixing
Surface 1 Sport Coating Base is ready for tinting and application. Do not dilute with water. Mix one (1) Surface 1 Color Tint Pack into each pail of Surface 1 Sport Basing Coat. Stir thoroughly before applying.
Application
Apply Surface 1 Sport Coating Base with a soft rubber squeegee (50-60 durometer recommended for squeegee rubber softness). Surface 1 recommends applying the complete multi-coat system to fill surface voids, change color schemes, and achieve a longer-lasting surface. Allow each coat to dry completely before applying additional coats or lines.
Drying Time
Drying time is dependent on temperature, shade, humidity, etc. (1 to 4 hours of dry time per coat can be expected).
Weather Conditions
Application temperature must be a minimum 50˚F and rising. Do not apply when temperature is expected to drop below 50˚F within a 24-hour period. In areas where dew or fog accumulates in the early evening, it is best to coat in the morning. Stop coating by early afternoon (3:00 pm) to prevent wash off, which will occur if dew, fog, or rain arrives before coating dries. Do not apply if rain is imminent or forecast within 24 hours of application.
Coverage
1 gallon will cover approximately 90-100 sq. ft., depending on pavement porosity (405-450 sq. ft. per 4.5-gallon pail).